litechampion.blogg.se - Deltronic mpc-5 user manual

Symptom Solutions Door begins to close (or open) but reverses 1) Mechanical Observations x Check door path for any obstructions such as large debris, chips, tool, “rough” spot in door track, etc. Symptom Solutions Door does not move (continued) 2) Mechanically Related x Does the door move freely when connected to drive Belt? x No - Does the output sheave turn without excessive effort? (The sheave will require some effort to rotate.

Technical Data (cont.) OUTPUTS Relay: Contact load 28VDC 1A or 120VAC.ĪTD Actuator ® Troubleshooting Guide Symptom Solutions Door does not move 1) Check Power to Unit x Blown Supply Fuse supplying power to ATD x Power Cable plugged into selector switch inside x Selector switch set to correct voltage (11.

13 Technical data Connection Voltage 115 / 230V AC (selected with an i.

12 Memory and System Layout The heart of the ATD 50 Actuator ® is a Mo.

The input signals for OPEN, CLOSE and REDUCED O.

11 Operation 11.1 Calibration Run The first movements after a power-up o.

REVERSING ERROR / GENERAL ERROR 2 This output is active when the interna.ĪTD 50 Actuator ® Operating InstructiN.

SET REDUCED OPEN POSITION This command sets the reduced door open positi.ĪTD 50 Actuator ® Operating InstructiN.

REDUCED OPEN This command causes the door to open to a preset position f.ĪTD 50 Actuator ® Operating InstructiN.

9 Standard Input Functions The ATD 50 Actuator ® can accept either mo.ĪTD 50 Actuator ® Operating InstructiN.

8 Hardware Error Displays The microprocessor controller has a red and g.ĪTD 50 Actuator ® Operating InstructiN.

7 Error Diagnosis There are 10 error conditions that can be detected by.ĪTD 50 Actuator ® Operating InstructiN.

6 Check List for Functional Tests (cont.) TEST 3: OPTIMIZE MOVEMENTS AC.ĪTD 50 Actuator ® Operating InstructiN.Check the main power voltage selection switch for prope.ĪTD 50 Actuator ® Operating InstructiN.4.2.2 Control Connection The ATD 50 Actuator ® has a versatile micropr.ĪTD 50 Actuator ® Operating InstructiN.4.2 Electrical Internal View of ATD 50 Actuator¨ 4.2.1 Main Power Conne.ĪTD 50 Actuator ® Operating InstructiN.4.1.3 Installation The ATD 50 Actuator ® internal frame is mounted in.4 Design Information 4.1 Mechanical All components in the system must be.2.3 General Information (cont.) The purchaser, designer, and/or installer.2.1 Correct Use The ATD 50 Actuator ® is designed for operating automati.1 Explanation of symbols This symbol warns of general hazards and of poss.MPC ATD ACTUATOR 50 ATD-313186 Operating and ManualĪTD 50 Actuator ® Operating Instructions PN. MPC ATD ACTUATOR 50 ATD-313186 Operating and ManualĪTD Actuator ® Operating and Installation Instructions Milwaukee Protective Covers 2300 South Calhoun Road New Berlin, WI 53151 Phone: 41 Fax: 41 © 1998 Milwaukee Protective Covers V2.0 Automatic Door Drive M.